Scania 8x2 is a convert
13th August 1998, Page 16
13th August 1998
Page 16
Page 16, 13th August 1998
— Scania 8x2 is a convert
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
• The UK's first Scania 8x2 has entered service with Gatwick Plant in Honey. Surrey. The R124G 360's full air suspension includes a lifting tag axle with the ability to fully load the drive axle for 90 seconds. The chassis is equipped with a range of drawbar towing eyes, and is plated at 38 tonnes GCW.
The Webb bodywork converts hydraulically from a 26ft flatbed into a beavertail, and can run either way with a 14tonne payload. An Atlas 390.1 crane is fitted, complete with radio remote control: it can lift 3.1 tonnes at the full 10.4m reach, or 8.0 tonnes at 5m.
The Scania enjoyed a highprofile start to its service life when it was used to collect stricken cars at this year's British Grand Prix.