Tipping container from Al
14th January 1988, Page 12
14th January 1988
Page 12
Page 12, 14th January 1988
— Tipping container from Al
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
• Al Trailers of Maldon Essex has supplied Roystonbased haulier Gary Smith with a sliding bogie skeletal semitrailer which can be used with tipping containers.
The semi-trailers have an extendable frame which allows a 6.9m axle spread for running at 38 tonnes with a two-plus-three axle configuration.
When the rear axles are closed, the 6.1m Tamplin TipKit container locates at the rear end for tipping.
Made from a specially constructed steel frame, the TipKit is fitted with a large Edbro DS16 ram, rated at 26 tonnes, giving a tip angle of 490.
The units can be secured to any semi-trailer equipped with twistlocks. When removed, the trailer can be used in the conventional manner.