AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Redesigned hand tools

17th November 1967
Page 57
Page 57, 17th November 1967 — Redesigned hand tools
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

TWO Stanley knives have been redesigned to fit more snugly in the hand and to give them a more modern appearance. They are the Stanley standard trimming knife 199A and the Stanley saw knife 1199SA.

The trimming knife has a die-cast metal body and is supplied complete with five blades packed inside the handle. All the blades are double ended and razor sharp. A blade guard is supplied to fit over the cutting edge when not in use.

The saw knife has a similar body and is supplied with three knife blades as well as a 7.5in. wood-cutting saw blade and a 7.5in metal-cutting saw blade.

Made by: Stanley Works (GB) Ltd., Woodside, Sheffield 3. Prices: Trimming knife, 6s. Saw knife, 8s 6d.

AN IGNITION COIL which gives an increased current to the sparking plugs when battery voltage is low has been introduced by Commercial Ignition Co. Ltd. Called the CI Cold Start, the coil is designed primarily to give easier starting in cold conditions when the required current is automatically supplied from a lower voltage.

Outwardly, the only difference between the CI coil and standard types is that there is an additional terminal on the tower for connection to the starter solenoid switch. A feature of the design is that when the engine is running the coil reverts to a normal primary current so saving undue wear on the contact-breaker points.

There is also a device to prevent feed back from the coil through the starter switch. Coils to replace normal types on both positive and negative earth systems are available. Made by: Commercial Ignition Co. Ltd., Newport Road, Hayes, Middx.

Price: £2 lOs (when replacing standard coil).