Chaseside Adopt Four-wheel Drive for Shovel
Page 65

If you've noticed an error in this article please click here to report it so we can fix it.
7HEREAS previous loading shovels 1. manufactured by the Chaseside gineering Co., Ltd., have been twoleek-drive types, the latest addition their range, the Loadroaster 1000, drive to all wheels. It has a payid capacity in its 11-cu.-yd. scoop of 00 lb.
e new loader is powered by a 3.6direct-injection oil engine developi1.5 b.h.p. at 2,250 r.p.rn., but other ies can be fitted to special order. A le converter and hydraulic multiclutches for forward and reverse an are incorporated in the transon, which provides four speed ranges rth directions. Maximum speed foror in reverse is 20.4 m.p.h.
spiral-bevel crown wheel and pinion epicyclic hub gearing are used for double-reduction axles. The rear Is are steered with hydraulic assist ance. Hydraulic brakes aided by a vacuum servo operate on alt. wheels: Tyres are 14.00-24 in. 8-ply.
The scoop is controlled by two pairs of hydraulic rams, the shovel linkage
operating about the front axle which acts as a fulcrum. Maximum pry-out force is 13,800 lb. and discharge height is 9 ft. 6 in. The Loadmaster 1000 weighs approximately 61 tons unladen and, with a full load, will scale a 1-in-2-t gradient.