Stainless steel clips
Page 58

If you've noticed an error in this article please click here to report it so we can fix it.
A series of stainless steel worm drive hose clips marketed by Circlex Marketing offers an ex-stock choice of 11 standard sizes covering a closed-down diameter range of between 12mm and 110mm. The uniform threading action allows fast, fitting with full and even circumferential compression. Marketed by: Circlex Marketing Ltd, Brook Way, Kingston Road, Leatherhead, Surrey.
"push-pullsystem of electr feed. Each machine is supp as a complete, individu tested unit and consists of tF main parts, the power soul electrode feed Unit and welc gun with hose, carried or four-wheel chassis which space for a gas cylinder.
The A9 electrode-feed sys. permits appreciably Ion welding hoses than non! push-feed systems. The stanc welding hose is 5m (16.4ft) I but hose lengths up to 1 (52.4ft) can be used.
Arc voltage is set by mean a switch on the 'power sou whereas the current — whic proportional to the electrc feed speed — is set by mean a knob on the welding gun. current can, therefore, easily adjusted during welding.
The welding gun is a stra barrel type and has a bui compressed-air turbine m, which pulls the electrode together with the electric m in the feed unit gives, ii claimed, smooth, positive feed. For welding in "diffic to-get-at" joints, the gun car fitted with a swan neck wl can be rotated through 360 ( The electrode feed speed is by, rotating a small k mounted at the front of feed-mechanism housing. compressed air for the turl motor is also used for coc purposes.
Made by: Esab Ltd, Gillingh Kent.