Two Oil Engines in Mobile Rig A MOBILE rig for servicing
Page 38

If you've noticed an error in this article please click here to report it so we can fix it.
oil wells up to 7,000 ft. deep has been produced by Woodfield Hoist and Associated Industries, Ltd., Rochester, Kent. The rig is based on a Scammell Constructor 21-ft. 9-in, wheelbase chassis, which is powered by a RollsRoyce C6 N.F.L. oil engine. A similar engine, mounted at the centre of the chassis, drives the draw works through a hydraulic torque converter.
From the six-speed constant-mesh gearbox, the drive goes to a transposing box, which incorporates an auxiliary two-speed gearbox. All three driving axles are of the Seammell epicyclic type, which allow for full oscillation when travelling over rough or soft ground. such as usually prevails in the oilfields.
An interesting feature of the rig is that the chassis members are jointed to allow the Ideco Woodfield KM-89-180-C telescopic mast to be left at a well. The chassis side members of the Constructor arc extended to accommodate
n12 (Below) A Scannell Constructor with Woodfield oil-well servicing rig. Two Rolls-Rayee engines are used. the hoist, and balance beams are provided in place of laminated springs for the suspension of the rear bogie. Several of these machines have been , ordered for use in oilfields in Venezuela. Syria and British Borneo.