Getting cold comfort from new rigid body
Page 26
If you've noticed an error in this article please click here to report it so we can fix it.
method to spraying in situ because of the possibility of cavities forming in the insulation.
All four edges of the panel are vapour-sealed to prevent water coming in and the resultant heat gain K value equals 0.35W / sgm'C per hour.
All the panels are manufactured with glass-fibre resin membranes running vertically through the polyurethane. These are spaced at 76mm (3in) intervals to form a vapour re.sistant barrier in the event of accidental damage.
The panels are faced on both sides with Gelcoat over grp and the floor is of all-welded -construction with radiused corners.
The doors are one piece grp faced and foam filled and are hung on four hinges per door with stainless steel hinge pins.
The new York range is available in lengths from 3.7 to 8.6in (12ft 2in to 28ft 3in) with an interior height of 2.6m (8ft Sin) and a door aperture height of 2.22m (7ft 3in).