I have heard that the Dualmatic Pro .ducts Co. of
Page 59

If you've noticed an error in this article please click here to report it so we can fix it.
Longmont, Colorado, USA, manufacture a dual-drive hub that can be manually adjusted to step-up the drive ratio. Do any accessory manufacturers in this country produce a drive of this kind? The makers state that it can be fitted to vehicles of up to 5-ton capacity equipped with a single driven axle or to any type of four-wheel-drive vehicle, including the Land-Rover.
ANo British company manufactures a twospeed hub and as far as is known a hub of this type is not produced by any European concern.
The use of planetary .gears, located in the hubs, for secondary reduction in conjunction with a single-reduction axle is, however, being increasingly favoured by the makers of heavy trucks in preference to a double-reduction axle.
The possiblity has been discussed of obtaining direct drive by locking-up the planetary gear, which could be done without undue complication, and would give direct drive for light-load running or operating over flat country.