1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148 
Recovery trailers
Page 98
If you've noticed an error in this article please click here to report it so we can fix it.
Ground level on/off loading trailers designated VT200 and VT280 now available from Eezion can be used to recover light commercial vehicles up to approximately 2 tons, without using separate ramps to load on to a high deck. The chassis of rectangular hollow sections supports longitudinal timber runners, while the rear of the chassis has a fullwidth chequer plate overlay. The trailer is mounted on a single axle.
The overrun braking system is operated from a hydraulic master cylinder built within the tow assembly.
Above the tow body is a platform designed to accommodate a 5 cwt. winch which can be purchased ag an optional extra. The VT200 series has an approximate payload of 1.5 tons while the VT280 payload is approximately 2.2 tons. Both models have a platform width of 5ft. Thin. at 7k, 6in. overall trailer width, and 12ft, 91n. length of platform at 16ft. 4in. overall trailer length.
Made by : Eezion Ltd, Stanley Works, Kempston Hardwick, Bedford.