Welding down prices
Page 108
If you've noticed an error in this article please click here to report it so we can fix it.
• A range of three low-priced 114.1G/MAG welders have been launched by ESAB. The LKA Original range has outputs from 150 to 240 amps. At the bottom end of the range the 150 and 180amp machines run off 240 volts while the 240-amp unit requires a three-phase supply At the light end, the 150 uses 0.6rnm filler wire and can weld plate up to 4.5mm, while at the other the 240 uses lnun filler to join plate up to 8mm. With the 180 and 240 machines the torch is connected via a Euro Central adaptor and they can carry 15kg/300mm filler wire reels and T/Y cylinders. On the 150, the filler wire reel is limited to 5kg/200rnm and a V/X sized cylinder and the torch is permanently fixed.
Prices range from £350 to 070, both ex-VAT.
Write number 92 on the reader reply card.