Now Three Hipope Loaders
Page 51
If you've noticed an error in this article please click here to report it so we can fix it.
ADDITIONS to the Hipope range of tailboard loaders made by H. C. Pope Ltd., 8 Elm Street, Northampton, result in there being three capacities now made. These are 7-5 cwt., 14 cwt. and 1 ton.
The hydraulic ram and lifting cables are in the vertical side members of a fabricated steel structure which fits to the rear of the body. These side members also incorporate guides for the tailboard supports. On the 7.5-cwt, model the tailboard is normally 2 ft. 6 in. deep and on the 14-cwt. and 1-ton versions it is 3 ft. deep.
Power is obtained from a gearbox-mounted power take-off and pump unit, but a battery-operated unit can be provided if required. The control valve is mounted at the inside rear corner of the body and allows for fine adjustment. A pressure-relief valve guards against overloading.
Prices for p.t.-o. operated units are £185, £200 and £215 for 7.5-cwt., 14-cwt. and 1-ton models respectively. Battery-operated units are an extra £40. Fitting charges vary from £30-£35 and delivery is from four to five weeks. Ease of fitting is said to be a feature of the design and the units can be installed in two to three days.